Straight axle gasser

We put a basic axle kit together making it easy to install a straight axle in your car. Gas coupes and sedans used stock wheelbases. It was the product of Blair’s Speed Shop (Pasadena, California), which came close to offering the suspension systems as a kit for full-bodied Gassers of the time. HRM reported that the design on this car was the handiwork of Mike Hoag at Blair’s.

Tabasco’s rear-suspension arrangement is a little freakish,. I have built several race car chassis and if you talk to the guys that have done this Gasser straight axle thing for a while, they will all tell you to stay away from the mild steel axles.

Especially on a heavy car like a Chevy, I would advise against any mild steel axles such as Speedway equipment. Customs - Is this Gasser front straight axle SAFE. Straight Axle USA has 30members. You get everything you need except a steering column. First you have to measure from the center of the front wheel to the front of the door.

Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on. You must first remove the car axle nut when you want to change the CV axle. Using straight pliers, remove the cotter pin that holds the car axle nut in place.

Remove the axle nut with the appropriate sized socket. There are many things to consider to install a straight axle and have the car handle correctly. Lou Lafon has owned this straight axle Chevelle for years.

It’s not usually as quick returning to a straight forward direction as we want so we give it some help by turning the steering wheel back to the straight-ahead position. With straight axles, positive caster (king pin inclination) is the ticket for stability. A typical Gasser setting starts at degrees and is fine-tuned to as much as degrees. If you use a factory type straight axle setup the caster can be adjusted by adding a wedge shaped shim between the axles and springs. You want to have at least degres of positive caster, which means the the axle will be tilted backwards degrees.

The problem with straight axles on the street has traditionally been driveability. Our frames have been engineered to solve this problem. It has a front steer design to provide virtually no bump steer. No straight axle gasser is safe. I can show you videos of them rolling over on the drag strip, not even trying to corner.

The best of them may be almost as good as a stock front end with worn out shocks and no sway bar but I doubt it. The transverse leaf front end is particularly scary. One of the most common mistakes when setting caster is making the adjustment while the chassis is not at ride height front and rear. Caster is the relationship of the axle to the groun not the chassis.

That means if it’s set at degrees positive with the frame sitting level on a jig,.

Free Same-Day Shipping on Orders Over $99! Measure from here forward to core support. STRAIGHT AXLE CHASSIS, 1wheel base, rails wide in rear, in front, 1over all length. On the way to get a straight axle put on.

I re-arched the springs about The '49-'truck axle is used because the width is very close to stock width at about 51. Chevy Truck Axle with re-arched springs. Project Cars For Sale has unearthed one awesome car for sale today!

We are also a manufacturer and distributor of specialty parts and components. Jump to navigation Jump to search.